top of page
Search

Temporary Road Signs Regulations: A Clear Guide for UK Compliance

Writer: The Sign Company UK
The Sign Company UK
1 minute ago
4 min read


Temporary road signs help you manage changing hazards, roadworks and traffic conditions without creating confusion or unnecessary risk. You must use signs that comply with applicable regulations and place them where drivers can see and understand them in time to respond safely.


You must select approved signs, install them correctly, maintain their visibility and remove them as soon as they no longer apply. This article explains the key legal duties, planning requirements and practical steps that help you keep temporary traffic arrangements safe and compliant.


Key Takeaways

  • Use approved signs that clearly communicate current hazards.

  • Plan placement, visibility and maintenance before installation.

  • Remove temporary signs promptly when conditions return to normal.


a flood warning sign place on the road side for temporary road signs

Legal Duties And Approved Signage



You must use legally recognised temporary road signs, place them safely, and keep them visible throughout the works. The rules identify which designs, dimensions, locations, and maintenance procedures you must follow, while assigning specific duties to highway authorities, contractors, and other parties.


Relevant Legislation And Guidance


In Great Britain, you must follow the Traffic Signs Regulations and General Directions 2016 (TSRGD) when selecting and placing temporary traffic signs. TSRGD prescribes sign designs, permitted variants, meanings, and certain permitted uses. You should also apply the Traffic Signs Manual, especially Chapter 8, which provides guidance on signing, lighting, and guarding road works.


The Highways Act 1980 gives highway authorities powers and duties concerning roads, obstructions, and works. The New Roads and Street Works Act 1991 and the Safety at Street Works and Road Works Code of Practice apply to many utility and street works.


You must assess the site, comply with applicable permit conditions, and follow the requirements of the relevant road authority. Where guidance uses terms such as should or recommended, record and justify any departure through your risk assessment.


Authorised Sign Designs And Dimensions


You must use a sign prescribed by TSRGD or an officially authorised variant. Do not create unofficial wording, symbols, colours, or layouts where an approved sign already covers the hazard. If you need a non-prescribed sign, obtain the required authorisation before installation.


Sign size depends on the road type, traffic speed, viewing distance, and available space. You must select the appropriate standard, large, or other permitted size and ensure that lettering remains legible from the required approach distance. Signs must use the prescribed colours, symbols, borders, and retroreflective materials.

Requirement

What you must check

Position

Drivers can see and understand the sign in time

Mounting

The sign remains stable and does not create a hazard

Visibility

Vegetation, parked vehicles, and equipment do not obscure it

Lighting

Required lamps operate during the specified hours

Responsibilities Of Highway Authorities And Contractors


Highway authorities must manage temporary signing on roads under their control and set conditions through approvals, permits, or traffic regulation orders where required. You must follow those conditions, including limits on work duration, lane closures, diversions, and sign removal.


As a contractor, you must install signs in accordance with the approved traffic management plan and inspect them at suitable intervals. You must correct tilted, damaged, dirty, displaced, or obscured signs promptly. You must also keep records of inspections, defects, corrective action, and any changes to the arrangement.


You must remove temporary road signs when the restriction or hazard ends. Leaving redundant signs in place can mislead road users and may breach the approval or permit conditions. Where several organisations work together, each party should clearly define responsibility for installation, inspection, maintenance, and removal.


temporary road signs

Planning, Installation And Removal



You must assess risks before placing signs, define how traffic will move safely, and ensure every sign remains visible and stable. Regular inspections and prompt removal prevent outdated instructions from confusing road users.


Risk Assessment And Traffic Management Plans


Before installing temporary signs, you must assess hazards created by the works, including reduced lane widths, restricted visibility, pedestrian diversions, queues, parked vehicles and nearby junctions. Record the road layout, traffic speeds, vulnerable road users and expected duration of the work.


Your traffic management plan should specify each sign’s location, mounting method, required clearance and removal date. It should also identify safe routes for pedestrians, cyclists and mobility-aid users, including suitable crossing points and access to homes, businesses and public transport.


Use the appropriate sign for the instruction or hazard. Confirm that signs comply with applicable regulations, authorisations and temporary traffic management requirements. Where work affects a public road, coordinate with the relevant highway authority and emergency services when the layout could delay access.


Safe Positioning And Visibility


You must position signs where drivers have enough time and distance to read, understand and act on them. Keep signs clear of vegetation, street furniture, parked vehicles, construction equipment and other signs, and avoid placing them where bends, crests or poor lighting restrict visibility.


Mount signs securely at the required height and angle. Do not allow supports, sandbags or sign edges to obstruct footways, cycleways or sight lines. Where signs stand near moving traffic, protect workers during installation and use stable bases that resist wind, vibration and vehicle turbulence.


Use clean, retroreflective signs that remain legible in darkness and poor weather. Check that temporary signs do not conflict with permanent signs, traffic signals or road markings; cover or remove information that no longer applies. Provide supplementary lighting where regulations or site conditions require it.


temporary road signs

For more guidance, read our blogs “Temporary Road Signs UK” and “Temporary Minimum Speed Signs” for practical advice on choosing and using temporary traffic signs.


Inspection, Maintenance And Timely Removal


You must inspect temporary road signs after installation and at intervals suited to the site’s risk, weather and traffic conditions. Check for damage, dirt, fading, twisting, loose fixings, fallen supports and changes in the road layout. Inspect again after strong winds, collisions, abnormal traffic movements or construction changes.


Keep a record of inspections, defects, corrective action and the person responsible. Replace damaged or illegible signs promptly, restore their original position and remove debris or equipment that blocks them. If a sign becomes unsafe, use an approved temporary control while arranging repair or replacement.


Remove each sign as soon as its instruction, warning or restriction no longer applies. Take down supports and bases as well, then restore the verge, footway or carriageway to a safe condition. Do not leave redundant signs in place, because road users may continue to follow outdated information.


 
 
 

Comments


Black-&-White-Minimalist-Business-Logo-1

CONTACT DETAILS

86-90 Paul St, London EC2A 4NE

  • Instagram
  • Facebook
  • Twitter
  • YouTube
  • pinterest icon

WORKING HOURS

Mon - Sun, 9:00am - 7:00pm

​

The Sign Company UK
© 2026 The Sign Company UK. All Right Reserved.

Images on this website include examples of signage manufactured by TSC Sign Company London Ltd and illustrative images used for design inspiration. Inspiration images do not represent our own completed projects, and remain the property of their respective owners. All product names, logos and company names are trademarks of their respective owners, and their use does not imply any affiliation with or endorsement by them. If you own an image shown on this site and would like it credited or removed, please contact sales@thesigncompanyuk.co.uk and we will act promptly.

bottom of page